The Rorty Aluminium Race Seat is a lightweight aluminium race seat that is adaptable to just about any off-road / track vehicle. With the Rorty seat bases, it mounts to the floor of your Rorty buggy or to almost any off-road or track vehicle.
“I just made a race seat with your plans…You were right, it was easy.” Leonel Claus, Germany.
This design is very easy to customise to your requirements. Make it wider or taller, remove the wings, the choice is yours. Water jet, plasma or laser cutting is quite ecomomical when you take into account the time saving, and it makes for a very neat job. DXF’s allow you to get it cut quickly at your local cutter.
Most fibreglass and blow-moulded polypropylene seats weigh well in excess of 5kg [11lbs] yet this seat weighs just 4.9kg [10.5lbs].
Purchase of the manual and DXF files licences the purchaser to cut and construct 2 Rorty aluminium race seats.
For aluminium trims used to finish the seat edges and holes visit Johnson Roll Forming. Profiles 850, 219, 357, 873, 897 can all be used depending on the specific application on the seat. These trims add edge strength as well as removing sharp edges. Pinchweld can be used where strength is not required (refer to the manual).
BUGGIES
PARTS
TOOLS
TRIKES
VW BUG
Currency conversions are estimated and should be used for informational purposes only. Checkout/purchases still use the store’s currency (AUD).
The Aluminium Race Seat Manual guides you through the basics of the construction process using plain-written instructions and scale drawings.
The pattern is supplied in the rear of the manual for large drivers up to 2m [6’6”] or smaller drivers 1.75m [5’10”]. The seats can be further customised during the padding and upholstery process allowing a tailored fit for the driver and co-pilot.
If you require a custom seat pattern, please contact us (form included in the manual).
The instructions lead you not only through the seat shell construction process, but also the provide guidance on upholstering and fitment. Seat base drawings for fitment in Rorty buggies and other vehicles (mounts to floor) are also provided.
In addition to the PDF manual and drawings, also included are the DXF files for the large and small race seats and the seat bases so you can take them to you local laser or water jet cutter and have them cut for you.
This is very economical and gives excellent results.
Purchase of the manual and DXF files licences the purchaser to cut and construct 2 Rorty aluminium race seats.
The Rorty laser cut Race Seat kit takes advantage of the latest in manufacturing techniques and provides you with a precision cut aluminium sheet kit ready for folding and welding into an awesome race seat suitable for any off-road / track vehicle.
All mount holes, belt holes and lightening holes are cut. Folding, welding, trims and upholstery are required to finish the seat.
Also included is the detailed Race Seat build manual.
Race Seat
Race Seat Manual
Seat Base
Total 5 pieces
Kit Weight: 5 kg (11 lbs)
Suits | A lightweight racing seat suitable for any race vehicle. Mounting to be adapted to suit application |
Build | Full DIY, PDF and DXF files supplied for small and large seat plus seat bases |
Fits | 2 patterns are supplied for large drivers up to 2m [6’6”] or smaller drivers 1.75m [5’10”] |
Licence | Purchase of the manual and DXF files licences the purchaser to cut and construct 2 Rorty aluminium race seats. |
Rorty uses cookies to ensure you get the best experience on our website. Click here to read more.